-
- Mazak FJV-60-160
- Table Size 157"X 49", Max Load 11000 lbs.,
- X Axis Travel 165", Y Axis Travel 55",
- Z Axis Travel 23", Spindle 6000 RPM/35 HP
|
Mazak Nexus FJV60-160
Table Size 51.18" x 21.56", X Axis Stroke 41.34, Y Axis Stroke
20.08", Z Axis Stroke 20.08", Distance Table to Spindle 25.98", Max
Load 2640 lbs., Spindle Taper: 40, Max Spindle: 12000 RPM |
 - LeBlond Makino FNC106-A
- 4-Axis Contouring Rotary Table
and Tail stock Vertical Machining Center - Longitudinal
Travel 41.34" - Cross Travel 23.62" - Vertical Travel 22.05" -
Spindle Nose to Table Range 8.886" to 30.91" - Spindle
Center to Column Foot 25.59" - Work Surface 55.12" x 23.62"
- Load Capacity 3300 lbs. - Spindle Motor 15/20 HP - Positioning
Accuracy +/- .0002" - Repeatability +/-
.0002"
|
 - Leblond Makino MC86
- 4-Axis Contouring Rotary
Table 2-Pallet Horizontal Machining Center - Longitudinal Travel
31.93" - Cross Travel 25" Vertical Travel
25" - Spindle Center to Table Top 3.94" to 32.87"
- Spindle Nose to Pallet Center 8" to 33" - Pallet
Size 24.8" to 24.8" - Max Pallet Load 2200 lbs. -
Spindle Motor 20/15 HP - Positioning Accuracy +/-
.0004" - Repeatability +/- .0004"
|
 - Leblond Makino MC86-A60
- 4-Axis Contouring Rotary
Table 2-Pallet Horizontal Machining Center - Longitudinal Travel
31.93" - Cross Travel 25" - Vertical Travel 25" -
Spindle Center to Table Top 3.94" to 32.87" - Spindle
Nose to Table Top 8" to 33" - Pallet Size 24.8" x
24.8" - Max Pallet Load 2205 lbs. - Spindle Motor
20/15 HP - Positioning Accuracy +/- .0002 - Repeatability +/-
.0002
|
 - Leblond Makino FNC106-A30
- 4-Axis Contouring Rotary
Table and Tail stock Vertical Machining Center -
Longitudinal Travel 41.34" - Cross Travel 23.62" -
Vertical Travel 22.05" - Spindle Nose to Table Range
8.86" to 30.91" - Spindle Center to Column Front
25.59" - Work Surface 55.12" x 23.62" -
Load Capacity 3300 lbs. - Spindle Motor 15/20 HP - Positioning
Accuracy +/- .0002" per Full Length - Repeatability +/-
.0002"
|
 - Leblond Makino FNC106-A30
- 4-Axis Contouring Rotary
Table and Tail stock Vertical Machining Center - Longitudinal
Travel 41.34" - Cross Travel 23.62" - Vertical Travel
22.05" - Spindle Nose to Table Range 8.86" to
30.91" - Spindle Center to Column Front 25.59" -
Work Surface 55.12" x 23.62" - Load Capacity 3300 lbs.
- Spindle Motor 15/20 HP - Positioning Accuracy +/- .0002"
per Full Length - Repeatability +/- .0002"
|
 - Toshiba BDT110-R16
- 5-Axis Simultaneous Controllable
Axis and Tail stock Horizontal Machining Center
- Spindle Travel (W axis) 19.7" - Head Stock Travel
59.1" - Table Cross Travel 78.74" - Table Longitudinal
Travel 78" - Index Table Size 55.1" x 63" - Table
Indexing Angle every .0001 degrees - Maximum Table Load 13,860
lbs. - Spindle Motor 40/30 lbs.
|
 - Toshiba BTD 200QF
- 4 Axis Simultaneous Controllable
Horizontal Machining Center - Spindle Travel (W Axis)
15.7" - Head Stock Travel (Y Axis) 39.4" - Table Cross
Travel (X Axis) 39.4" - Table Longitudinal Travel (Z Axis)
27.6" - Table Size 39.4" X 39.4" - Max.
Table Load 6600 Lbs. - Spindle Motor 40/30 HP.
|
Cell-Con H-15D
Longitudinal Travel 18", Cross Travel 24",
Vertical Travel 17", Spindle Motor 15 HP,
Dual Pallet Shuttle System for each head,
Positioning Accuracy +/-.0002,
Repeatability +/-.0001 |
